|
Products
|
DBX Driverack 4820 DBX Driverack 4820 - Call for pricing - Sound ProcessorDownloads
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
DBX DriveRack 4800 & 4820 Brochure (pdf)| Specifications | |
| Analog Inputs (4) | |
| Connectors | Female XLR |
| Type | Electronically balanced, RF filtered |
| Impedance | >50 kΩ |
| Max. Input Level | Software selectable for: +28, +26, +24, +22, +20, +18, +16, +14 dBu |
| CMRR | >40 dB typ, >55 dB at 1 kHz |
| Digital Inputs (4) AES/EBU Channels | |
| Connectors | Female XLR |
| Type | Transformer Isolated, RF filtered |
| Impedance | 110 Ω |
| RTA Input (1) Analog | |
| Connectors | Female XLR |
| Gain Range | 20 dB to 50 dB in 10 dB increments |
| Analog Outputs (8) | |
| Connector | Male XLR |
| Type | Electronically balanced, RF filtered |
| Impedance | 30 Ω |
| Max. Output Level | Software selectable for: +24, +22, +20, +12, +8, +4 dBu |
| Digital Outputs (8) AES/EBU Channels | |
| Connectors | Male XLR |
| Type | Transformer Isolated, RF filtered |
| Impedance | 110 Ω |
| A/D Performance | |
| Type | dbx Type IV™ Conversion System |
| Dynamic Range | >113 dB unweighted, 116 dB A-weighted |
| Type IV Dynamic Range | 126 dB with transient material, A-weighted, 22 kHz BW 123 dB with transient material, unweighted, 22 kHz BW 118 dB typical with program material, A-weighted, 22 kHz BW |
| Sample Rate | 96 kHz |
| A/D Wordlength | 24 bits |
| D/A Performance | |
| Dynamic Range | 112 dB unweighted, 115 dB A-weighted |
| Sample Rate | 96 kHz |
| D/A Wordlength | 24 bits |
| System Performance | |
| Dynamic Range | 110 dB unweighted, 113 dB A-weighted |
| Internal Processing | 32 bit floating point |
| THD+Noise @ 1 kHz | 0.004% typical at +4 dBu, 0 dB input gain |
| Frequency Response | 20 Hz-20 kHz, ±0.25 dB, <10 Hz-50 kHz +0/-3dB @ 96kHz |
| Interchannel Crosstalk | <-85 dB @ 1 kHz, 0 dB input gain |
| Processing | |
| Pre EQ Type | One 31-band Graphic EQ on each input One EQ that is switchable between 31-band Graphic and 9-band Parametric on each input |
| Range | ±15 dB |
| Input Insert Processing | Two selectable Insert Processing blocks per input |
| Type | Noise Gate, Compressor, Auto Gain Control, De-Esser, Sub-Harmonic Synth, Notch filters and Advanced Feedback Suppression |
| Input Delay Length | Up to 682 msec available |
| Routing/Mixing | 4-input mixer available at each output allowing any input to be sent or mixed to any output |
| Output Insert Processing | Two selectable Insert Processing blocks per output |
| Type | Noise Gate, AutoWarmth®, Compressor, Auto Gain Control, Peak Limiter, Sub-Harmonic Synth |
| X-Over Filter Configs | 1x1, 1x2, 1x3, 1x4, 1x5, 1x6, 1x7, 1x8, 2x2, 2x3, 2x4, 2x5, 2x6, 2x7, 2x8, 3x3, 3x4, 3x6, 3x7, 4x4, 4x8 |
| Types | Bessel 6, 12, 18, 24, 36 and 48 dB per Octave Butterworth 6, 12, 18, 24, 36 and 48 dB per Octave Linkwitz-Riley 12, 24, 36, and 48 dB per Octave |
| Polarity | Positive and Negative |
| Phase Control | 0 to -180 degrees in 5 degree increments |
| Output Delay Length | 1365 mSec shared between the outputs |
| Miscellaneous | |
| Control | Ethernet, RS-232, Optional dbx ZC Wall Panels |
| Power Requirements | 100-240V 50/60 Hz, 45 Watts |
| Weight | 5.0 kg (11 lbs) |
| Dimensions | 8.89 x 48.3 x 31.8 cm (3.5" x 19" x 12.5") |
757.498.6118 Ext - 109, Or