SSE 6
 SSE 6 - Call for pricing - 6.5-inch 150 watt Loudspeaker
Downloads
The new SSE enclosure series features high power ratings with custom components, a sleek look and a unique, snap-in metal grille.
The SSE 6 is a two-way system featuring the highly acclaimed Peavey 14XT™ titanium compression driver
with a Sound Guard™ IV tweeter protection network and a maximum-performance 6.5" woofer.
It is rated at 150 Watts program and 300 Watts peak. This lightweight speaker system is ideal for smaller venues where space is at a premium.
Connections include a four-pin Neutrik® Speakon® or a paralleled two-position terminal block for additional cabinets.
The SSE Series is available in black, off-white and natural finishes.
Features
- Two-way sound reinforcement enclosure
- Designed for permanent installation
- Premium 6.5" woofer
- Peavey 14XT™ titanium compression driver
- Sound Guard™ IV tweeter protection network
- Available in three finishes: black, off-white or natural
- Mounting point for VersaMount™ 35 bracket
Architectural and Engineering Specifications
The loudspeaker system shall have an operating bandwidth of 100 Hz to 17 kHz.
The nominal output level shall be 90.0 dB when measured at a distance of one meter with an input of one watt.
The nominal impedance shall be 8.0 ohms.
The maximum continuous power handling shall be 75 watts, with maximum program power of 150 watts and a minimum amplifier headroom of 3 dB.
The nominal radiation geometry shall be 120 degrees in the horizontal plane and 130 degrees in the vertical plane.
The outside dimensions shall be 16.41 inches high by 9.95 inches wide by 9.47 inches deep.
The weight shall be 21 pounds. The loudspeaker system shall be a model SSE 6.
| Specifications |
| Frequency Response (±3dB) | 100 Hz–17 kHz | Power Handling | 75 W cont. / 150 W prog. / 300 W peak |
| Frequency Range (-10dB) | 80 Hz–21 kHz | Box Tuning Frequency | 100 Hz |
| Sensitivity 1 W/1 m | 90 dB | Crossover Frequency | 2400 Hz |
| Max SPL/ 1m (calc) | 115 dB | Nominal Impedance | 8 Ω |
| Coverage (HxV) | 120° x 130° | Minimum Impedance | 8.5 Ω |
| Transducers (LF/HF) | 6.5" premium / 14XT | Input Connections | (1) 4-pin Neutrik Speakon, (1) two-position terminal strip |
| Enclosure Material | Birch plywood w/ textured acrylic finish and cloth covered metal grille | Mounting Provisions | (1) mounting bracket for walls/ceilings, (4) ¼"-20 threaded mounting points for Versamount 35 |
| Dimensions (HxWxD) | 41.7 x 25.3 x 24.0 cm
(16.4" x 9.95" x 9.5") | Weight | 9.5 kg (21 lbs) |
|
SSE 6 Spec Sheet (pdf)